Atlas Instruments - Clipper Weight Indicator
The Atlas Clipper Production Weight Indicator is completely portable. This weight indicator is primarily used on workover rigs. It can also be used on water wells, smaller rigs, production hoists, etc. The Atlas Clipper Production Weight Indicator can be used as a stand-by for larger rigs if necessary. Calibrated dial faces are available for line sizes from 3/4" to 1 1/4" in english and metric.
The diaphragm installs easily on the dead line. The deflection plug depresses as the weight is increased and provides a pressure signal to the indicating gauge where the pressure is indicated as weight. The Atlas Clipper Production Weight Indicator is loaded with the correct amount of fluid and sealed at the factory. There is not a stouter diaphragm unit on the market today. Again, we invite your comparison.
Company Profile | Products and Services | Contact Us! | Home
© Control Drilling Service (1987) Ltd.
5921 - 87A Street, Edmonton, Alberta, T6E 5W6
Tel: (780) 465-6006, Fax: (780) 469-8872, Cell: (780) 951-4128 or (780) 719-2260